Pepperl+Fuchs
130985
IC-KP-B7-V95 Auswer
Pepperl+Fuchs 130985
IC-KP-B7-V95 Auswer
Control interface unit
Description
The innovative concept of the RFID identification system IDENTControl from Pepperl+ Fuchs has many advantages in comparison to other systems. The core piece of the system is the evaluation unit IDENTControl. Control interface unit IDENTControl with DeviceNet interfacefa. Thanks to the integrated interfaces for all standard field bus systems such as PROFIBUS, EtherNet, PROFINET IO, DeviceNet, serial connections (RS 232/RS 485/RS 422) and numerous connection options for inductive write/read heads as well as microwave antennas, the evaluation unit IDENTControl can be adjusted to your needs in a flexible and easy manner. LEDs indicate operating power and bus communication, connected write/read heads and active write/read commands. Mounting the unit onto DIN mounting rails is easy thanks to the snap-fits on the back of the housing of the evaluation unit IDENTControl . With its L-shaped housing, the evaluation unit including bus connector fits into a 120 mm grid in the switch cabinet. The mounting depth of 70 mm furthermore enables installation in flat switch boxes with a depth of only 100 mm. There are 3 further mounting holes for field mounting.
Technical parameters
| Number of read/write heads: | max. 4 alternative 2 read/write heads and 2 trigger sensors |
| UL File Number: | E87056 |
| LEDs 1, 2, 3, 4: | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
| LED PWR/ERR: | green: power on red: Hardware fault |
| LED Module Status: | green: normal operation red flashing: recoverable fault red: unrecoverable fault red/green flashing: LED test |
| LED Network Status: | green: on-line, connected green flashing: on-line, not connected red: critical link failure red flashing: connection timeout red/green flashing: LED test |
| LED Network Pwr: | green flashing at startup: LED test green: network power available |
| LED COM: | yellow flashing at startup: LED test yellow: data exchange |
| LC display: | two-line multi-function display with 12 characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands and addressing |
| Button: | 4 keys: ESC, up, down and return |
| Rated operating voltage: | 20 ... 30 V DC, PELV |
| Ripple: | ≤ 10 % at 30 V DC |
| Current consumption: | ≤ 2 A incl. read/write heads |
| Power consumption: | 2.5 W Without read/write heads |
| Network voltage: | 11 ... 25 V DC, PELV |
| Network current consumption: | ≤ 40 mA |
| Galvanic isolation: | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
| Physical: | DeviceNet |
| Protocol: | CIP |
| Transfer rate: | 125, 250, 500 kBit/s |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1 |
| RoHS: Directive 2011/65/EU (RoHS): | EN 50581 |
| Degree of protection: | IEC 60529 |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -30 ... 80 °C (-22 ... 176 °F) |
| Climatic conditions: | air humidity max. 96 % |
| Shock and impact resistance: | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
| Degree of protection: | IP67 |
| Connection: | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M6 earthing screw DeviceNet: Mini-Style |
| Material: Housing: | powder coated aluminum |
| Installation: | snap-on to 35 mm standard rail or screw fixing |
| Mass: | approx. 1000 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | Deutschland |
| EAN: | 4050143014194 |
| Weight: | 1.17 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |