Pepperl+Fuchs 128232

U-P6V4A-B6 SLKopf

Base for read/write station, stainless steel version

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

The base is used in combination with an upper part, the IPT*-FP read/write station. Base for PROFIBUS DP, stainless steel versionfa. The device is operated as a slave on the PROFIBUS DP. The device makes available the complete read/write functionality. Up to 32 bytes are transmitted per cycle. Of these, up to 7 double words, each with 32 bits, are available to the user. The address is set and the terminating resistor for the bus is connected via DIP switches. While the bus termination is switched on, the subsequent subscribers which are connected to the terminals (P, N out) are disconnected from the bus.

Technical parameters

DIP switch: Setting the station address bus connection ON = active  OFF = non-active
Rated operating voltage: 20 ... 30 V DC , ripple 10 %SS , PELV
Power consumption: max. 5 W with read/write head IPT*-FP
Galvanic isolation: Operating voltage/interface: functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff
Physical: RS-485
Protocol: PROFIBUS DP acc. to EN 50170
Transfer rate: 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Degree of protection: IP67 (only in connection with write/read head or cover )
Connection: screw terminals
Interface cable: 2 x 0.64 mm2, double screened, acc. to PROFIBUS standard EN 50170
Supply: up to 3 x 1.5 mm2
Material: Housing: stainless steel V4A

Logistic parameters

ECCN:
Country of Origin: Deutschland
EAN: 4050143013401
Weight: 1.80 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m