View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
120335
UCC1000-30GM-IUR2-V15
Request a Quote
Pepperl+Fuchs 120335
UCC1000-30GM-IUR2-V15
Ultrasonic sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Single head system, High chemical resistance through PTFE coated transducer surface, Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000, Analog current and voltage output, Series: -30GM, Housing: Stainless steel 1.4305 / AISI 303. O-ring for cover seal: Viton, Connection type: Connector plug M12 x 1 , 5-pinfa
Technical parameters
| Sensing range: | 80 ... 1000 mm |
| Adjustment range: | 100 ... 1000 mm |
| Dead band: | 0 ... 80 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 175 kHz |
| Response delay: | 65 ms minimum 195 ms factory setting |
| LED green: | solid: Power-on flashing: Standby mode or program function object detected |
| LED yellow 1: | solid: object in evaluation range flashing: program function |
| LED yellow 2: | solid: object in detection range flashing: program function |
| LED red: | solid: temperature/program plug not connected flashing: fault or program function object not detected |
| Temperature/TEACH-IN connector: | Temperature compensation , Evaluation range programming , output function setting |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| Power consumption: | ≤ 900 mW |
| Time delay before availability: | ≤ 500 ms |
| Interface type: | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
| Synchronization: | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Synchronization frequency: Common mode operation: | max. 30 Hz |
| Synchronization frequency: Multiplex operation: | ≤ 30 Hz / n , n = number of sensors , n ≤ 5 |
| Output type: | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V |
| Resolution: | evaluation range [mm]/4000, but ≥ 0.35 mm |
| Deviation of the characteristic curve: | ≤ 0.2 % of full-scale value |
| Repeat accuracy: | ≤ 0.1 % of full-scale value |
| Load impedance: | current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm |
| Temperature influence: | ≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) |
| Standard conformity: Standards: | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | 0 ... 70 °C (32 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 5-pin |
| Degree of protection: | IP65 |
| Material: Housing: | Stainless steel 1.4305 / AISI 303 O-ring for cover seal: Viton |
| Material: Transducer: | PTFE (diaphragm surface) |
| Mass: | 170 g |
| Output: | evaluation limit A1: 100 mm evaluation limit A2: 1000 mm rising ramp |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |