110350
KCT2-6ST-V
Counter/Timer/Tachometer
Counter/Timer/Tachometer, Extremely bright, large LED indicator, 1 pre-select value with transistor output, PNP and NPN sensors can be connected, Adding/subtracting via 2 separate inputsfa
| Pre-selection: | single |
| Data storage: | 106 storage cycles or 10 years, EEPROM |
| Programming: | keypad-driven menu |
| MTTFd: | 330 a |
| Mission Time (TM): | 10 a |
| Diagnostic Coverage (DC): | 0 % |
| Type: | 7-segment LED display, red |
| Number of digits: | 6 |
| Display value: | digit height 14 mm |
| Pre-selection: | active at counter value ≤ 0 |
| Key interlock: | - |
| Display interval: | -199999 ... 999999 with suppression of leading zeros |
| Decimal point: | 0 to max 3 fractional digits |
| Scale factor: | 0.0001 ... 99.9999 |
| Reset: | manually or external |
| Operating voltage: | 90 ... 260 V AC |
| Power consumption: | max. 6 VA |
| Counting frequency: | 30 Hz / 20 kHz (max. 11 kHz when counting with phase discriminator) |
| Minimum pulse duration: | 5 ms for reset input |
| Impedance: | 10 kOhm |
| Voltage: | low: 0 ... 4 V DC ; high: 12 ... 30 V DC |
| Counting method: | adding or subtracting |
| Sensor supply: | 24 V DC ± 15 % / 100 mA |
| Response time: | 6 ms |
| Optocoupler: | NPN, open collector and open emitter 30 V / 15 mA |
| Ambient temperature: | -20 ... 65 °C (-4 ... 149 °F) |
| Storage temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Relative humidity: | ≤ 80 % (noncondensing) |
| Connection: | 2-pin and 7-pin plug-in connection terminals, core cross-section ≤ 1.5 mm2 |
| Mass: | approx. 150 g |
| Dimensions: | 96 mm x 48 mm x 90 mm |
| Mounting: | latch fastener (dimension 48 mm x 100 mm) |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |