036504
NJ8-18GM-N-V1-Y36504
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 2-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 4-pin, Degree of protection: IP67fa
| Switching function: | Normally closed (NC) |
| Output type: | NAMUR |
| Rated operating distance: | 8 mm |
| Installation: | non-flush |
| Assured operating distance: | 0 ... 6.48 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.85 |
| Nominal voltage: | 8.2 V (Ri approx. 1 kΩ) |
| Operating voltage: | 5 ... 25 V |
| Switching frequency: | 0 ... 200 Hz |
| Hysteresis: | 3 % |
| Current consumption: Measuring plate not detected: | min. 3 mA |
| Current consumption: Measuring plate detected: | ≤ 1 mA |
| Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Connection type: | Connector M12 x 1 , 4-pin |
| Housing material: | Stainless steel 1.4305 / AISI 303 |
| Sensing face: | PBT |
| Housing diameter: | 18 mm |
| Degree of protection: | IP67 |
| ECCN: | |
| Country of Origin: | ID |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |