Pepperl+Fuchs 016259

NJ20P+U1+A2

Inductive sensor

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

Series: VariKont ®, Housing material: PBT, Output type: 4-wire, Installation: non-flush, Type of voltage: DC, Connection type: terminal compartment, Degree of protection: IP68fa

Technical parameters

Switching function: complementary
Output type: PNP
Rated operating distance: 20 mm
Installation: non-flush
Output polarity: DC
Assured operating distance: 1 ... 16.2 mm
Reduction factor rAl: 1
Reduction factor rCu: 1
Reduction factor rSt37: 0
Reduction factor rBrass: 1 (Minimum distance: 2 mm)
Operating voltage: 10 ... 30 V
Switching frequency: 0 ... 200 Hz
Hysteresis: 1 ... 10 typ. 5 %
Reverse polarity protection: reverse polarity protected
Short-circuit protection: pulsing
Voltage drop: ≤ 3 V
Operating current: 0 ... 200 mA
No-load supply current: ≤ 20 mA
Operating voltage indicator: LED, green
Switching state indicator: LED, yellow
UL approval: cULus Listed, General Purpose
CSA approval: cCSAus Listed, General Purpose
CCC approval: CCC approval / marking not required for products rated ≤36 V
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)
Connection type: terminal compartment
Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section: up to 2.5 mm2
: Minimum core cross-section: without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
: Maximum core cross-section: without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material: PBT
Sensing face: PBT
Degree of protection: IP68

Logistic parameters

ECCN:
Country of Origin: ID
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m