OT050175
Sensor optical, diffuse-reflection sensor, M5x0.5 47long, Sn: 20, 10-30V DC, 1x PNP NO (NO), Connector M8 3pin, IP67, V2A+Sapphire glass, 0.2kHz, Infrared light, Point
Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected. As soon as the receiver detects the reflected light, the switching output integrated in the device changes its status.
Thread length: | 30mm |
Housing material: | Stainless steel (V2A) |
Thread size, metric: | 5 |
Material of optical surface: | Sapphire glass |
Sensor length: | 46.8mm |
Design: | Cylinder, screw-thread |
Ambient temperature: | 0 - 55°C |
Thread pitch: | 0.5mm |
Degree of protection (IP): | IP67 |
Max. tightening torque: | 1.5Nm |
Voltage type: | DC |
Number of switching outputs: | 1 |
Type of electrical connection: | Connector M8 |
Type of switching function: | Normally open contact (NO) |
Operating voltage: | 10 - 30V |
Rated switching current: | 100mA |
Max. switching distance: | 20mm |
Sensing range: | 20 - 20mm |
Response time: | 2.5ms |
Residual ripple: | 20% |
Readiness delay: | 20ms |
Clock frequency of the transmitter: | 1kHz |
Number of pins: | 3 |
Switching frequency: | 200Hz |
Type of switching output: | PNP |
Equipment protection class: | Protection class 3 |
No-load current: | 15mA |
Short-circuit protection: | yes |
Scanning function: | Light switching |
Reverse polarity protection: | yes |
Hysteresis: | 10% |
Voltage drop: | 2V |
Decay time: | 2.5ms |
Light source: | Infrared light |
Light exit: | Axial |
Wavelength of the sensor: | 880nm |
Light beam form: | Point |
eClass 7.0: | 27270903 |
eClass 7.1: | 27270903 |
eClass 8.0: | 27270903 |
eClass 9.0: | 27270903 |
eClass 9.1: | 27270903 |
ETIM-6.0: | EC001821 |
ETIM-7.0: | EC001821 |
IPF Product Group: | 100 |
shipping weight: | 0.02kg |
packaging dimensions: | 180mm x 10mm x 210mm |
customs tariff number: | 85365019 |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |