OE18040A
Sensor optical, Through-beam sensor receiver, M18x1 50long, Sn: 20m, 10-35V DC, PNP Anticoincidence, Cable 4pin 2m PVC, IP67, Brass Chrome-plated+Glass, Polarity free red light
Optical sensors. Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected. As soon as the receiver detects the reflected light, the switching output integrated in the device changes its status.
Version: | Through-beam sensor receiver |
Thread length: | 50mm |
Design: | Cylinder, screw-thread |
Housing coating: | Chrome-plated |
Thread size, metric: | 18 |
Material of optical surface: | Glass |
Degree of protection (IP): | IP67 |
Max. tightening torque: | 20Nm |
Wire cross section: | 0.25mm² |
Cable length: | 2m |
Housing material: | Brass |
Ambient temperature: | -25 - 55°C |
Thread pitch: | 1mm |
Material of cable sheath: | PVC |
Sensor length: | 50mm |
Voltage type: | DC |
Type of input voltage: | DC |
Type of electrical connection: | Cable |
Type of switching function: | Anticoincidence |
No-load current: | 10mA |
Rated switching current: | 200mA |
Scanning function: | Light-/dark-on mode |
Reverse polarity protection: | yes |
Residual ripple: | 20% |
Connection to amplifier: | no |
Decay time: | 0.5ms |
Number of pins: | 4 |
Switching frequency: | 1000Hz |
Type of switching output: | PNP |
Operating voltage: | 10 - 35V |
Measuring range: | 20m |
Short-circuit protection: | yes |
Rated switching distance: | 20000mm |
Response time: | 0.5ms |
Voltage drop: | 2V |
Readiness delay: | 20ms |
No-load current, receiver: | 10mA |
Scope of delivery of the one-way system: | Receiver |
Light source: | Polarity free red light |
Light beam form: | Point |
Wavelength of the sensor: | 660nm |
eClass 7.0: | 27270901 |
eClass 7.1: | 27270901 |
eClass 8.0: | 27270901 |
eClass 9.0: | 27270901 |
eClass 9.1: | 27270901 |
ETIM-6.0: | EC002716 |
ETIM-7.0: | EC002716 |
IPF Product Group: | 100 |
shipping weight: | 0.14kg |
packaging dimensions: | 77.0mm x 25.0mm x 123.0mm |
customs tariff number: | 85365019 |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |