DT98C692
Pressure transmitter, Ø26mm 111long, 0-100bar, 8-32V DC, G1/2 inch A, 8-32V DC, -40-85°C, 4-20mA, Valve connector type A 2pin, IP65, V4A, Front-flush membrane, CIP compatible, Compatible with foodstuff
Pressure sensors are suitable for measuring different media with high accuracy. They are available with switching output and/or analog output. Using PC software, the measured values can be recorded depending on the device type. These sensors can be used in all areas of e.g. pneumatic and hydraulic applications.
Thread length: | 20.5mm |
Housing material: | Stainless steel 1.4404 |
Thread pitch: | 1.81mm |
Bursting pressure: | 420bar |
Sensor diameter: | 26.5mm |
Medium temperature: | -40 - 125°C |
Sensing element material: | Stainless steel 1.4435 |
Max. operating pressure: | 100bar |
Design: | Cylinder plain |
Ambient temperature: | -40 - 85°C |
Degree of protection (IP): | IP65 |
Type of pressure connection: | G1/2 inch A |
Sensor length: | 111mm |
Nominal pressure: | 100bar |
Front-flush membrane: | yes |
CIP compatible: | yes |
Voltage type: | DC |
Type of analog output: | 4 mA ... 20 mA |
Operating voltage: | 8 - 32V |
Rated operating voltage Ue at DC: | 8 - 32V |
Temperature drift: | 0.75% |
Response time: | 10ms |
Measurement method: | Relative |
Number of pins: | 2 |
Type of electrical connection: | Valve connector type A |
Relative measurement accuracy: | 0.5% |
Short-circuit protection: | yes |
Reverse polarity protection: | yes |
Measuring range pressure: | 0 - 100bar |
Compatible with foodstuff: | yes |
Measuring display: | Relative |
eClass 7.0: | 27371814 |
eClass 7.1: | 27371814 |
eClass 8.0: | 27371814 |
eClass 9.0: | 27371814 |
eClass 9.1: | 27371814 |
ETIM-6.0: | EC000243 |
ETIM-7.0: | EC000243 |
IPF Product Group: | 700 |
shipping weight: | 0.4kg |
packaging dimensions: | 138.0mm x 95.0mm x 210mm |
customs tariff number: | 90262020 |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |