BA960900
Mounting method: | Front mounting |
Height: | 96mm |
Housing material: | PPE |
Degree of protection (IP), front side: | IP54 |
Width: | 96mm |
Length: | 114mm |
Ambient temperature: | -20 - 50°C |
Degree of protection (IP): | IP20 |
Voltage type: | DC |
Display: | LCD |
Number of switching outputs: | 4 |
USB interface: | yes |
Analog input, voltage: | yes |
Analog output, voltage: | yes |
Type of electrical connection: | Clamps |
Type of switching function: | Normally open contact (NO) |
Setting procedure: | Parameterization |
Max. continuous current: | 6A |
Short-circuit protection: | yes |
Initial value of measuring range, current: | 0A |
Reverse polarity protection: | yes |
Decay time: | 20ms |
Transducer power supply voltage: | 24V |
Resistance of current input: | 50Ohm |
Voltage type of transducer power supply: | DC |
Type of analog input: | 0 V ... 10 V / 4 mA ... 20 mA / 0 … 20 mA |
Power consumption: | 5VA |
Max. switching capacity: | 180W |
Max. switching current: | 10A |
Analog input, current: | yes |
Analog output, current: | yes |
Type of analog output: | 0 V ... 10 V / 4 mA ... 20 mA |
Type of switching output: | Relay contact |
Rated control supply voltage Us at DC: | 18 - 36V |
Relative measurement accuracy: | 0.4% |
Rated switching current: | 6000mA |
Temperature drift: | 0.1%/K |
End value measuring range, current: | 0.02A |
Response time: | 20ms |
Digital resolution: | 14Bit |
Transducer power supply current: | 35mA |
Resistance of voltage input: | 100kOhm |
Characteristic curve deviation: | 0.05% |
eClass 7.0: | 27210123 |
eClass 7.1: | 27210123 |
eClass 8.0: | 27210123 |
eClass 9.0: | 27210123 |
eClass 9.1: | 27210123 |
ETIM-6.0: | EC002475 |
ETIM-7.0: | EC002475 |
IPF Product Group: | 550 |
packaging dimensions: | 138.0mm x 95.0mm x 210mm |
customs tariff number: | 85437090 |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |