KL9260
KL9260 | Potential supply terminal, 120…230 V AC, with diagnostics and fuse
The KL9260 power feed terminal makes it possible to set up various potential groups with the standard voltage of 230 V AC (120 V AC). In order to monitor the supply voltage, the terminal with diagnostics reports the status of the power feed terminal to the Bus Coupler through two input bits. It is thus possible for the controller to check the distributed peripheral voltage over the fieldbus.
Nominal voltage: | 120/230 V AC |
Current load: | ≤ 10 A |
Integrated fine-wire fuse: | …6.3 A |
Diagnostics: | yes |
Power LED: | green |
Defect LED: | red |
Reported to K-bus: | yes |
PE contact: | yes |
Shield connection: | – |
Renewed infeed: | – |
Connection facility to additional power contact: | 1 |
K-bus, looped through: | yes |
Bit width in the process image: | 2 |
Electrical connection to DIN rail: | – |
Current consumption K-bus: | typ. 10 mA |
Electrical isolation: | yes |
Housing width: | 12 mm |
Special features: | integrated fuse |
Weight: | approx. 55 g |
Side by side mounting on Bus Terminals with power contact: | yes |
Side by side mounting on Bus Terminals without power contact: | yes |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Approvals/markings: | CE, UL, ATEX, GL |
Ex marking: | II 3 G Ex nA IIC T4 Gc |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |