KL9180
KL9180 | Potential distribution terminal, 2 x 24 V DC; 2 x 0 V DC, 2 x PE
The KL9180 Bus Terminal allows the supply voltage to be accessed a number of times via spring force terminals. The Bus Terminal makes it unnecessary to use additional terminal blocks on the terminal strip.
Nominal voltage: | arbitrary up to 230 V AC |
Current load: | ≤ 10 A |
Integrated fine-wire fuse: | – |
Diagnostics: | – |
Power LED: | – |
Defect LED: | – |
Reported to K-bus: | – |
PE contact: | yes |
Shield connection: | – |
Renewed infeed: | – |
Connection facility to additional power contact: | 2 |
K-bus, looped through: | yes |
Bit width in the process image: | 0 |
Electrical connection to DIN rail: | – |
Current consumption K-bus: | – |
Electrical isolation: | – |
Housing width: | 12 mm |
Weight: | approx. 50 g |
Side by side mounting on Bus Terminals with power contact: | yes |
Side by side mounting on Bus Terminals without power contact: | – |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Pluggable wiring: | for all KSxxxx Bus Terminals |
Approvals/markings: | CE, UL, ATEX, GL |
Ex marking: | II 3 G Ex nA IIC T4 Gc |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |