KL9070
KL9070 | Shield terminal
The KL9070 shield terminal provides eight terminal points with the potential of the mounting rail and enables the screening to be picked up without further modular terminal blocks or wiring. With its internal seamless copper surface, the KL9070 offers good screening between two Bus Terminals.
Nominal voltage: | ≤ 60 V |
Current load: | ≤ 10 A |
Integrated fine-wire fuse: | – |
Diagnostics: | – |
Power LED: | – |
Defect LED: | – |
Reported to K-bus: | – |
PE contact: | – |
Shield connection: | 8 x |
Renewed infeed: | – |
Connection facility to additional power contact: | no |
K-bus, looped through: | yes |
Bit width in the process image: | 0 |
Electrical connection to DIN rail: | yes |
Current consumption K-bus: | – |
Electrical isolation: | yes |
Housing width: | 12 mm |
Special features: | dissipation of EMC interference via large copper surfaces on the DIN rail |
Weight: | approx. 50 g |
Side by side mounting on Bus Terminals with power contact: | yes, left without PE |
Side by side mounting on Bus Terminals without power contact: | yes |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Approvals/markings: | CE, UL, ATEX |
Ex marking: | II 3 G Ex nA IIC T4 Gc |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |