KL2791
KL2791 | 1-channel AC motor speed controller 230 V AC, 200 VA
The KL2791 AC motor speed controller is designed for direct connection of different single-phase AC motors with small capacity. The KL2791 enables speed reduction of typical motors such as capacitor motors, universal motors and shaded-pole motors. The required output is specified via the process data. The output setting matches respective output value through targeted on and off switching at optimised times. This technique is particularly suitable for drives with quadratic load characteristic such as fans and pumps.
Connection technology: | direct motor connection |
Number of outputs: | 1 motor |
Mains voltage: | 230 V AC |
Rated output: | ≤ 200 VA |
Load type: | 1-phase AC motors |
Max. output current: | 0.9 A |
Control type: | phase/full wave control |
Resolution: | 1 % |
Reverse voltage protection: | no |
Electrical isolation: | 500 V (K-bus/field voltage), 3,750 V AC (1 min.) |
Leakage current (OFF state): | < 1 mA |
Current consumption power contacts: | only load |
Current consumpt. K-bus: | typ. 95 mA |
Bit width in the process image: | output: 1 x 16 bit data (1 x 8 bit control/status optional) |
Weight: | approx. 60 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/see documentation |
Pluggable wiring: | for all KSxxxx Bus Terminals |
Approvals: | CE |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |