KL2702
KL2702 | 2-channel solid state load relay up to 230 V AC/DC
The KL2702 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2702 terminal has two independent outputs. Its signal state is indicated by means of light emitting diodes.
Connection technology: | 2-/3-/4-wire |
Number of outputs: | 2 x make contacts |
Rated load voltage: | 0…230 V AC/DC (DC…100 Hz) |
Load type: | ohmic, inductive |
Max. output current: | 0.3 A per channel, individually short-circuit-proof |
Frequency range: | DC…100 Hz |
Surge voltage protection: | from 400 V AC |
Peak current: | 0.5 A (20 s), 1.5 A (100 ms) |
Contact resistance: | 2.1 Ω typ., 3.2 Ω max. |
Switch-on time: | 4…6 ms |
Switch-off time: | 0.05…0.1 ms |
Switch-on delay: | 320 µs |
Switch-off delay: | 6.2 ms |
Max. residual voltage: | (2.1 Ω) |
Electrical isolation: | 500 V (K-bus/field voltage), 2500 V AC (1 min.) |
Leakage current (OFF state): | << 1 mA |
Current consumption power contacts: | only leakage and load current |
Current consumption K-bus: | typ. 10 mA |
Bit width in the process image: | 2 outputs |
Configuration: | no address or configuration setting |
Special features: | – |
Weight: | approx. 55 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Pluggable wiring: | for all KSxxxx Bus Terminals |
Approvals: | CE, UL, Ex, GL |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |