Article image EL6861

Beckhoff EL6861

EL6861 | 1-channel BACnet MS/TP interface RS485, D-sub connection

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

The EL6861 serial interface enables the connection of BACnet MS/TP devices (Master-Slave/Token-Passing) via an RS485 interface. Up to 32 MS/TP devices (up to 64 if ultra-low power transceivers are used) can be connected. Use the EL6861 interface only in combination with TwinCAT and CX9020 or higher, since the BACnet MS/TP driver integrated in TwinCAT implements the communication via the MS/TP protocol (BACnet Revision 12). The configuration is also done in TwinCAT.

Technical parameters

Technology: D-sub, 9-pin
Devices: 32, up to 64 if ultra-low power transceivers are used
Data transfer channels: 1
Data transfer rates: 9600, 19,200, 38,400, 57,600, 76,800 and 115,200 baud (default: 9600 baud)
Interfaces: 1 x RS485
Termination resistor: externally via ZB3100 or ZS1031-3000 connector
Bias resistor (network bias): externally via ZB3100 or ZS1031-3000 connector
Cable length: max. 500 m twisted pair
Providing external supply: 1 x max. 5 V/20 mA, out of E-bus supply, short-circuit proof
Power supply: via the E-bus
Distributed clocks:
Electrical isolation: 500 V (E-bus/signal voltage)
Bit width in the process image: 128 x 8 bit input, 128 x 8 bit output, 16 bit control, 16 bit status
Configuration: configuration via controller, TwinCAT
Current consumption power contacts:
Current consumption E-bus: typ. 170 mA
Special features: can only be used with TwinCAT
Weight: approx. 55 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.: IP 20/variable
Approvals: CE, UL

Logistic parameters

ECCN:
Country of Origin:
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m