Beckhoff
EL2596-0010
Beckhoff EL2596-0010
EL2596-0010 | 1-channel LED strobe control terminals
Description
The LED driver terminals from the EL2596 series contain a flexible power supply unit that supplies the LED with the required voltage and current. The terminals support applications from constant lighting to short light pulses in the kHz range. Each individual flash can be triggered in a controlled manner by the control system via the distributed clocks/timestamp function. The EL2596-xxxx terminals also feature a trigger output for camera triggering as well as high-end fast voltage and current control, e.g. for providing line scan cameras with constant illumination. Extensive real-time diagnostics, e.g. for input current/voltage and output current/voltage allow detailed monitoring of the LED light intensity. Thus, overdrive applications with short high-current pulses through the LED are possible. If a given load corridor is left, which can be defined e.g. by means of load errors, the EL259x switches off to protect the LED. Subsequent reset is possible.
Technical parameters
| Recommended use: | standard terminal for illumination in vision applications up to 48 V DC |
| Connection technology: | 2-wire |
| Number of outputs: | 1 |
| Input voltage: | 48 V DC (-15 %/+20 %) |
| Load type: | ohmic (LED) |
| Distributed clocks: | yes |
| Distributed clock precision: | << 1 µs |
| Output voltage: | 0…(UIN - 2 V) |
| Max. output current: | 0…3 A (depending on output current and Duty Cycle) |
| Switching times: | typ. TON: < 1 µs, typ. TOFF: < 1 µs, pulses from 50 µs |
| Triggeroutput (to camera): | 1 (electrically isolated, max. 10 mA push-pull, 5…24 V DC) |
| Trigger input (from camera): | 1 (electrically isolated, typ. 3 mA, 5…24 V DC, switchable sensitivity) |
| Current consumption E-bus: | typ. 180 mA |
| Electrical isolation: | 500 V (E-bus/field potential) |
| Current consumption power contacts: | – |
| Special features: | constant voltage, constant current and PWM as available operating modes; extensive real-time diagnostics; connection option voltage divider TriggerOut; continuous LED operation possible |
| Weight: | approx. 55 g |
| Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
| Relative humidity: | 95 %, no condensation |
| Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 20/variable |
| Approvals/markings: | CE |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |