EK9300
EK9300 | PROFINET RT Bus Coupler
The EK9300 Bus Coupler connects PROFINET RT networks to the EtherCAT Terminals (ELxxxx) as well as the EtherCAT Box modules (EPxxxx) and converts the telegrams from PROFINET RT to the E-bus signal representation. One station consists of an EK9300 and any number of EtherCAT Terminals. The coupler is connected to PROFINET RT via RJ45. In EtherCAT, the PROFINET RT coupler has at its disposal a lower-level, powerful and ultra-fast I/O system with a large selection of terminals. The coupler supports the PROFINET RT profile and fits seamlessly into PROFINET RT networks.
Task within EtherCAT system: | coupling of standard digital and analog EtherCAT Terminals and EtherCAT Box modules to PROFINET RT networks |
Number of EtherCAT Terminals: | depending on the process data size |
Type/number of peripheral signals: | depending on the process data size |
Protocol: | PROFINET RT |
Data transfer rates: | 100 Mbit/s |
Configuration: | not required |
Bus interface: | 2 x RJ45 (switched) |
Power supply: | 24 V DC (-15 %/+20 %) |
Input current: | typ. 120 mA + (total E-bus current)/4 |
Current consumption E-bus: | up to 2 A |
Power contacts: | max. 24 V DC/max. 10 A |
Electrical isolation: | 500 V (power contact/supply voltage/Ethernet) |
Dimensions (W x H x D): | 64 mm x 100 mm x 73 mm |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Approvals: | CE, UL, Ex, IECEx |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |