Article image EK1101

Beckhoff EK1101

EK1101 | EtherCAT Coupler with ID switch

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

The EK1101 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1101 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.

Technical parameters

Task within EtherCAT system: coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification
Data transfer medium: Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations: max. 100 m (100BASE-TX)
Number of EtherCAT Terminals: up to 65,534
Type/number of peripheral signals: max. 4.2 GB addressable I/O points
Number of configurable IDs: 4096
Protocol: EtherCAT
Delay: approx. 1 µs
Data transfer rates: 100 Mbit/s
Configuration: not required
Bus interface: 2 x RJ45
Power supply: 24 V DC (-15 %/+20 %)
Current consumption from US: 70 mA + (∑ E-bus current/4)
Current consumption from UP: load
Current supply E-bus: 2000 mA
Current consumption E-bus:
Power contacts: max. 24 V DC/max. 10 A
Electrical isolation: 500 V (power contact/supply voltage/Ethernet)
Weight: approx. 105 g
Operating/storage temperature: -25…+60 °C/-40…+85 °C
Relative humidity: 95 %, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.: IP 20/variable
Approvals/markings: CE, UL, ATEX, IECEx
Ex-Marking: II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc

Logistic parameters

ECCN:
Country of Origin:
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m