Article image EJ9576

Beckhoff EJ9576

EJ9576 | Brake chopper module

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

The EJ9576 EtherCAT module contains high-performance capacitors for stabilising supply voltages. The EJ9576 can be used in conjunction with the EJ7047 stepper motor modules, the EJ7342 DC motor modules and the EJ7211-0010 servomotor modules. Low internal resistance and high-pulsed current capability enable good buffering in parallel with a power supply unit. Return currents are stored, particularly in the context of drive applications, thus preventing overvoltages. If the regenerative energy exceeds the capacity of the capacitors, energy can be dissipated via an external braking resistor. The corresponding threshold can be directly parameterised in the TwinCAT System Manager.

Technical parameters

Technology: brake chopper
Current consumption E-bus: typ. 85 mA
Nominal voltage: arbitrary up to 72 V
Capacity: 155 µF
Ripple current (max.): 10 A
Internal resistance: < 5 mΩ
Chopper voltage: adjustable
Recommended braking resistor: 10 Ω, typ. 100 W (dependent on application)
Overvoltage control range: typ. 1 V, parameterisable by CoE data
Braking resistor clock rate: load-dependent, max. 100 µs, 2-point control
Electrical isolation: 1500 V (E-bus/field potential)
Diagnostics: temperature on board, over-/undervoltage
Special features: adjustabel threshold
Dimensions (W x H x D): approx. 12 mm x 66 mm x 55 mm
Operating/storage temperature: 0…+55 °C/-25…+85 °C
Relative humidity: 95 %, no condensation
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protection class: IP 20
Approvals: CE, UL

Logistic parameters

ECCN:
Country of Origin:
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m