BX5100
BX5100 | CANopen Bus Terminal Controller
The BX5100 Bus Terminal Controller has a CANopen slave interface. It has automatic baud rate detection up to 1 Mbaud and an address selection switch for address assignment. Up to 16 Tx PDOs and 16 Rx PDOs can be exchanged with the control.
Programming: | TwinCAT (via programming interface or fieldbus) |
Program memory: | 256 kbytes |
Data memory: | 256 kbytes |
Remanent data: | 2 kbytes |
Persistent data: | 1 kbyte |
Runtime system: | 1 PLC task |
PLC cycle time: | approx. 1 ms for 1,000 instructions (without I/O cycle, K-bus) |
Programming languages: | IEC 61131-3 (IL, LD, FBD, SFC, ST) |
Online change: | yes |
Up/down load code: | yes/yes |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |