8935520000
RCMKITP-I 24VDC 4COTRAK
| Type: | RCMKITP-I 24VDC 4COTRAK |
| Order No.: | 8935520000 |
| Version: | RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact with test button AgNi 90/10, Rated control voltage: 16.8 V DC...24 V DC...30 V DC, Continuous current: 3 A, PUSH IN |
| GTIN (EAN): | 4032248711758 |
| Qty.: | 10 pc(s). |
| Width: | 28 mm |
| Width (inches): | 1.102 inch |
| Height: | 98 mm |
| Height (inches): | 3.858 inch |
| Depth: | 78.3 mm |
| Depth (inches): | 3.083 inch |
| Net weight: | 111 g |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V DC + 25 % / - 30 % |
| Power rating: | 1 W |
| Status indicator: | Green LED |
| Rated switching voltage: | 240 V AC |
| Max. switching voltage, AC: | 240 V |
| Continuous current: | 3 A |
| AC switching capacity (resistive), max.: | 750 VA |
| Switch-on delay: | ≤ 15 ms |
| Switch-off delay: | ≤ 10 ms |
| Min. switching power: | 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 4 CO contact with test button (AgNi 90/10) |
| Rail: | TS 35 |
| Test button: | yes (lockable) |
| Mechanical switch position indicator: | Yes |
| Colour: | black |
| Rated voltage: | 250 V |
| Pollution severity: | 3 |
| Insulating material group: | IIIa |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 4 mm |
| Impulse withstand voltage: | 5 kV (1.2/50 µs) |
| Standards: | DIN EN 50178, DIN EN 61373:1999 (shock and vibration), DIN EN 50155:2008 (operating voltage range) |
| Certificate no. (CSA) relay: | 249409-2426937 |
| Certificate no. (CSA) base: | 249409-2295474 |
| Certificate no. (cURus) base: | E223759 |
| Wire connection method: | PUSH IN |
| Stripping length, rated connection: | 12 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.75 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire cross-section, solid, min.: | 0.75 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.75 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.75 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 0.75 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.75 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
| Type: | RCMKITP-I 24VDC 4COTRAK |
| Order No.: | 8935520000 |
| Version: | RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact with test button AgNi 90/10, Rated control voltage: 16.8 V DC...24 V DC...30 V DC, Continuous current: 3 A, PUSH IN |
| GTIN (EAN): | 4032248711758 |
| Qty.: | 10 pc(s). |
| Width: | 28 mm |
| Width (inches): | 1.102 inch |
| Height: | 98 mm |
| Height (inches): | 3.858 inch |
| Depth: | 78.3 mm |
| Depth (inches): | 3.083 inch |
| Net weight: | 111 g |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V DC + 25 % / - 30 % |
| Power rating: | 1 W |
| Status indicator: | Green LED |
| Rated switching voltage: | 240 V AC |
| Max. switching voltage, AC: | 240 V |
| Continuous current: | 3 A |
| AC switching capacity (resistive), max.: | 750 VA |
| Switch-on delay: | ≤ 15 ms |
| Switch-off delay: | ≤ 10 ms |
| Min. switching power: | 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 4 CO contact with test button (AgNi 90/10) |
| Rail: | TS 35 |
| Test button: | yes (lockable) |
| Mechanical switch position indicator: | Yes |
| Colour: | black |
| Rated voltage: | 250 V |
| Pollution severity: | 3 |
| Insulating material group: | IIIa |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 4 mm |
| Impulse withstand voltage: | 5 kV (1.2/50 µs) |
| Standards: | DIN EN 50178, DIN EN 61373:1999 (shock and vibration), DIN EN 50155:2008 (operating voltage range) |
| Certificate no. (CSA) relay: | 249409-2426937 |
| Certificate no. (CSA) base: | 249409-2295474 |
| Certificate no. (cURus) base: | E223759 |
| Wire connection method: | PUSH IN |
| Stripping length, rated connection: | 12 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.75 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire cross-section, solid, min.: | 0.75 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.75 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.75 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 0.75 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.75 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.111 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |