KA1420
KAS-80-A21/61-S-K-PEEK-3D, ATEX
Printing Industry. Capacitive sensors detect all kinds of inks:. Water based • solvent based • UV-Inks
| Thread / Process connection: | M 8 x 1 |
| Housing material active surface: | PEEK (FDA 21 CFR 177.2415) |
| Housing material: | PEEK (FDA 21 CFR 177.2415) |
| Housing material lid: | PA |
| Electrical version: | 3-Leiter DC |
| Operating current (Ie): | 0…150 mA |
| Voltage drop max. (Ud): | ≤ 2 V |
| Permitted residual ripple max.: | 10% |
| Noload current (Io): | Typ. 15 mA |
| Frequency of operating cycles max.: | 50 Hz |
| LEDdisplay: | Gelb |
| Protective circuit: | Eingebaut |
| Degree of protection IEC 60529: | IP 67 (mit versiegelter Potentiometerschraube) |
| Norm: | EN 60947-5-2 |
| Media optimized: | JA |
| Quattro Protect: | JA |
| Sensing dinstance Sn: | produktberuehrend-mediumabhaengig-einstellbar |
| Operating voltage: | 10…30 V DC |
| Permitted ambient temperature min.: | -20 °C |
| Permitted ambient temperature max.: | +70 °C |
| Installation: | Nichtbündig |
| Output function: | Schließer |
| Output signal: | PNP |
| Cable length: | 2 m |
| Connection: | PUR-Kabel, 3 x 0,14 mm² |
| CE: | JA |
| RoHS: | JA |
| ATEX product marking dust: | Ex II 3D IP67 T101° C X |
| Certified Zones ATEX: | 3D |
| MTTF: | 1780 Jahre |
| WHG certification: | Auf Anfrage |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |