View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Phoenix Contact
2966171
PLC-RSC- 24DC/21
Request a Quote
Phoenix Contact 2966171
PLC-RSC- 24DC/21
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Utilization restriction: | EMC: class A product, see manufacturer's declaration in the download area |
| Type of note: | Notes on operation |
| Note: | Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500.... |
| Width: | 6.2 mm |
| Height: | 80 mm |
| Depth: | 94 mm |
| Ambient temperature (operation): | -40 °C ... 60 °C |
| Ambient temperature (storage/transport): | -40 °C ... 85 °C |
| Degree of protection: | RT III (Relay) |
| Nominal input voltage UN: | 24 V DC |
| Typical input current at UN: | 9 mA |
| Typical response time: | 5 ms |
| Typical release time: | 8 ms |
| Protective circuit: | Reverse polarity protection Polarity protection diode |
| Operating voltage display: | Yellow LED |
| Power dissipation for nominal condition: | 0.22 W |
| Contact type: | 1 PDT |
| Type of switch contact: | Single contact |
| Contact material: | AgSnO |
| Maximum switching voltage: | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage: | 5 V (at 100 mA) |
| Min. switching current: | 10 mA (at 12 V) |
| Maximum inrush current: | 10 A (4 s) |
| Limiting continuous current: | 6 A |
| Interrupting rating (ohmic load) max.: | 140 W (at 24 V DC) |
| Switching capacity: | 2 A (at 24 V, DC13) |
| Test voltage relay winding/relay contact: | 4 kV AC (50 Hz, 1 min.) |
| Operating mode: | 100% operating factor |
| Flammability rating according to UL 94: | V0 (Housing) |
| Mechanical service life: | 2x 107 cycles |
| Mounting position: | any |
| Assembly instructions: | In rows with zero spacing |
| Connection name: | Coil side |
| Connection method: | Screw connection |
| Stripping length: | 8 mm |
| Screw thread: | M3 |
| Conductor cross section solid: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG: | 26 ... 14 |
| Connection name: | Contact side |
| Connection method: | Screw connection |
| Stripping length: | 8 mm |
| Screw thread: | M3 |
| Conductor cross section solid: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG: | 26 ... 14 |
| Connection in acc. with standard: | CUL |
| Designation: | Standards/regulations |
| Standards/regulations: | IEC 60664 |
| Pollution degree: | 3 |
| Overvoltage category: | III |
| REACh SVHC: | Lead 7439-92-1 |
| China RoHS: | Environmentally Friendly Use Period = 50 years |
| eCl@ss 10.0.1: | 27371601 |
| eCl@ss 4.0: | 27371100 |
| eCl@ss 4.1: | 27371100 |
| eCl@ss 5.0: | 27371600 |
| eCl@ss 5.1: | 27371600 |
| eCl@ss 6.0: | 27371600 |
| eCl@ss 7.0: | 27371601 |
| eCl@ss 8.0: | 27371601 |
| eCl@ss 9.0: | 27371601 |
| ETIM 2.0: | EC001437 |
| ETIM 3.0: | EC001437 |
| ETIM 4.0: | EC001437 |
| ETIM 5.0: | EC001437 |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| UNSPSC 6.01: | 30211916 |
| UNSPSC 7.0901: | 39121515 |
| UNSPSC 11: | 39121515 |
| UNSPSC 12.01: | 39121515 |
| UNSPSC 13.2: | 39122334 |
| UNSPSC 18.0: | 39122334 |
| UNSPSC 19.0: | 39122334 |
| UNSPSC 20.0: | 39122334 |
| UNSPSC 21.0: | 39122334 |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.031 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |