View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Phoenix Contact
2320018
MINI-PS- 12- 24DC/ 5-15DC/2
Request a Quote
Phoenix Contact 2320018
MINI-PS- 12- 24DC/ 5-15DC/2
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Width: | 22.5 mm |
| Height: | 99 mm |
| Depth: | 107 mm |
| Installation distance right/left: | 0 mm / 0 mm (≤ 70 °C) |
| Installation distance top/bottom: | 50 mm / 50 mm (≤ 70 °C) |
| Degree of protection: | IP20 |
| Ambient temperature (operation): | -25 °C ... 70 °C (> +60°C derating) |
| Ambient temperature (storage/transport): | -40 °C ... 85 °C |
| Max. permissible relative humidity (operation): | ≤ 95 % (At +25°C, non-condensing) |
| Climatic class: | 3K3 (in acc. with EN 60721) |
| Degree of pollution: | 2 |
| Nominal input voltage range: | 12 V DC ... 24 V DC |
| Input voltage range: | 10 V DC ... 32 V DC (> 10.5 V DC start) |
| Frequency range DC: | 0 Hz |
| Current consumption: | 2.3 A (12 V DC) |
| Inrush current: | < 10 A (typical) |
| Mains buffering time: | typ. 4 ms (12 V DC) |
| Input fuse: | 6.3 A (slow-blow, internal) |
| Nominal output voltage: | 12 V DC ±1 % |
| Setting range of the output voltage (USet): | 5 V DC ... 15 V DC |
| Nominal output current (IN): | 2 A (-25 °C ... 60 °C) |
| Derating: | 60 °C ... 70 °C (2.5%/K) |
| Connection in parallel: | Yes, for assembling redundant systems and increasing efficiency |
| Connection in series: | yes |
| Feedback voltage resistance: | 30 V DC |
| Protection against overvoltage at the output (OVP): | < 25 V DC |
| Residual ripple: | < 20 mVPP (20 MHz) |
| Typical response time: | < 0.5 s |
| Peak switching voltages nominal load: | < 10 mVPP (20 MHz) |
| Maximum power dissipation in no-load condition: | < 1 W |
| Power loss nominal load max.: | < 4.2 W |
| Net weight: | 0.2 kg |
| Efficiency: | > 88 % (at 24 V DC and nominal values) |
| MTBF (IEC 61709, SN 29500): | > 2072000 h (40 °C) |
| Insulation voltage input/output: | 1.5 kV (type test) |
| Degree of protection: | IP20 |
| Protection class: | III |
| Housing material: | Polyamide (PA) |
| Mounting position: | horizontal DIN rail NS 35, EN 60715 |
| Assembly instructions: | alignable: horizontally 0 mm, vertically 50 mm |
| Connection method: | Pluggable screw connection |
| Conductor cross section solid min.: | 0.2 mm² |
| Conductor cross section solid max.: | 2.5 mm² |
| Conductor cross section flexible min.: | 0.2 mm² |
| Conductor cross section flexible max.: | 2.5 mm² |
| Conductor cross section AWG min.: | 24 |
| Conductor cross section AWG max.: | 14 |
| Stripping length: | 7 mm |
| Screw thread: | M3 |
| Connection method: | Pluggable screw connection |
| Conductor cross section solid min.: | 0.2 mm² |
| Conductor cross section solid max.: | 2.5 mm² |
| Conductor cross section flexible min.: | 0.2 mm² |
| Conductor cross section flexible max.: | 2.5 mm² |
| Conductor cross section AWG min.: | 24 |
| Conductor cross section AWG max.: | 14 |
| Stripping length: | 7 mm |
| Screw thread: | M3 |
| Output name: | DC OK active |
| Output description: | UOUT > 0.9 x UN: High signal |
| Output voltage: | Uout |
| Continuous load current: | ≤ 20 mA |
| Status display: | "DC OK" LED green |
| Note on status display: | UOUT > 0.9 x UN: LED ON |
| Conductor cross section solid min.: | 0.2 mm² |
| Conductor cross section solid max.: | 2.5 mm² |
| Conductor cross section flexible min.: | 0.2 mm² |
| Conductor cross section flexible max.: | 2.5 mm² |
| Conductor cross section AWG min.: | 24 |
| Conductor cross section AWG max.: | 14 |
| Tightening torque, min: | 0.5 Nm |
| Tightening torque max: | 0.6 Nm |
| Screw thread: | M3 |
| EMC requirements for noise immunity: | EN 61000-6-1 |
| EMC requirements for noise emission: | EN 61000-6-3 |
| Standard - Electrical safety: | EN 60950-1/VDE 0805 (SELV) |
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations: | EN 50178/VDE 0160 (PELV) |
| Standard - Safe isolation: | DIN VDE 0100-410 |
| Rail applications: | EN 50121-4 |
| UL approvals: | UL/C-UL listed UL 508 |
| CSA: | CSA-C22.2 No. 107.1-01 |
| Electromagnetic compatibility: | Conformance with EMC Directive 2014/30/EU |
| Low Voltage Directive: | Conformance with Low Voltage Directive 2014/35/EC |
| Electrostatic discharge: | EN 61000-4-2 |
| Electromagnetic HF field: | EN 61000-4-3 |
| Fast transients (burst): | EN 61000-4-4 |
| Surge voltage load (surge): | EN 61000-4-5 |
| Conducted interference: | EN 61000-4-6 |
| Voltage dips: | EN 61000-4-11 |
| REACh SVHC: | Lead 7439-92-1 |
| China RoHS: | Environmentally Friendly Use Period = 25; |
| eCl@ss 10.0.1: | 27210901 |
| eCl@ss 4.0: | 27210900 |
| eCl@ss 4.1: | 27210900 |
| eCl@ss 5.0: | 27210900 |
| eCl@ss 5.1: | 27210900 |
| eCl@ss 6.0: | 27210900 |
| eCl@ss 7.0: | 27210901 |
| eCl@ss 8.0: | 27210901 |
| eCl@ss 9.0: | 27210901 |
| ETIM 3.0: | EC001039 |
| ETIM 4.0: | EC002542 |
| ETIM 5.0: | EC002046 |
| ETIM 6.0: | EC002046 |
| ETIM 7.0: | EC002046 |
| UNSPSC 6.01: | 30211502 |
| UNSPSC 7.0901: | 39121004 |
| UNSPSC 11: | 39121004 |
| UNSPSC 12.01: | 39121004 |
| UNSPSC 13.2: | 39121041 |
| UNSPSC 18.0: | 39121041 |
| UNSPSC 19.0: | 39121041 |
| UNSPSC 20.0: | 39121041 |
| UNSPSC 21.0: | 39121041 |
Logistic parameters
| ECCN: | |
| Country of Origin: | CN |
| EAN: | |
| Weight: | 0.20 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |