Pepperl+Fuchs
916969
WHA-BLT-F9D0-N-A0-Z1-1
Pepperl+Fuchs 916969
WHA-BLT-F9D0-N-A0-Z1-1
Bullet WirelessHART Adapter
Description
The device upgrades a conventional HART or 4 .. 20 mA field device with a WirelessHART interface. Installation in Zone 1, 21, Installation in Class I, II, Division 1, Installation in Class III, Ex d housing for Ex d field devices, Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA .. 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa. The supply is ensured via loop power. The adapter with type of protection Ex d can be used directly on a field device with type of protection Ex d. Up to 8 HART field devices can be connected to each other in multidrop mode. The encapsulated antenna allows for use in harsh environments. The device can be programmed with a configuration tool easily (DTM or DD).
Technical parameters
| Rated voltage: | 7 ... 32 V DC |
| Rated current: | < 1 mA , max. 25 mA |
| Output rated operating current: | 3.2 ... 25 mA |
| Supply: | loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V |
| Connection: | - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point |
| HART communication: Protocol: | HART 7.1, backward compatible |
| HART communication: Number of devices: | up to 8 HART field devices (depending on installation) |
| Interface: | internal antenna |
| Communication: | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART |
| Radio and telecommunication terminal equipment: | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| HART communication: Directive 2014/53/EU: | EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017 |
| HART communication: FCC CFR47 Part 15 B and C: | ANSI C63.4-2003 , FCC ID: X89-WA1101 |
| Degree of protection: | IEC 60529:2013 |
| Ambient temperature: | temperature class T5: -40 ... 85 °C (-40 ... 185 °F) temperature class T6: -40 ... 75 °C (-40 ... 167 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | max. 100 % |
| Degree of protection: | IP67 |
| Material: | Aluminum alloy with polyurethane enamel paint |
| Mass: | 460 g |
| Dimensions: | 60.8 x 60.8 x 100 mm (l x w x h) |
| EU-Type Examination Certificate: | FM 17 ATEX 0046 X |
| HART communication: Marking: | II 2 G Ex db IIC T6...T5 Gb II 2 D Ex tb IIIC T95°C Db |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-1:2014 , EN 60079-31:2014 |
| FM approval: | FM 17 NUS 0010 FM 17 US 0191 X |
| Directive conformity: Control drawing: | 116-0425 (cFMus) |
| Directive conformity: Approved for: | XP Class I, II, III, Division 1, Groups A-G Class I, Zone 1, AEx db IIC T6...T5 Gb Zone 21, AEx tb IIIC T95°C Db |
| CSA approval: | FM 17 NCA 0004 FM 17 CA 0102 X |
| Directive conformity: Control drawing: | 116-0425 (cFMus) |
| Directive conformity: Approved for: | XP Class I, II, III, Division 1, Groups A-G Ex db IIC T6...T5 Gb Ex tb IIIC T95°C Db |
| IECEx approval: IECEx certificate: | IECEx FMG 17.0020X |
| IECEx approval: IECEx marking: | Ex db IIC T6...T5 Gb , Ex tb IIIC T95°C Db |
| IECEx approval: Standards: | IEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-31:2013 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Logistic parameters
| ECCN: | |
| Country of Origin: | US |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |