915549
HM-MT-USB-PWRX-010031P
Viator USB-HART-Schnittstelle mit PowerXpress HM-MT-USB-PWRX-010031P
The Viator+® USB HART Interface with PowerXpress™ and a standard PC are all you need to commission, calibrate, and acquire data from any HART device. The interface supplies up to 40 mA of current to power the device. Power is drawn via the USB port, greatly simplifying field and bench commissioning of HART devices.
Input current: | 30 mA at 5 V for modem only , 255 mA at 5 V with device power and modem |
Power supply: | Powered by USB port , No external power required |
Interface type: | USB 2.0 port or higher |
Signal: | 0.5 ± 0.1 Vpp trapezoidal wave at 1200/2200 Hz, 24 VDC at 40 mA to device |
Output/interface: | 500 V DC |
Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
RoHS: Directive 2011/65/EU (RoHS): | EN 50581:2012 |
Operating system: | Windows® 98 , 2000 , 32-bit XP , 32-bit Vista , 32- and 64-bit Windows® 7, and Windows® 10 |
Operating temperature: | -20 ... 50 °C (-4 ... 122 °F) |
Storage temperature: | -20 ... 60 °C (-4 ... 140 °F) |
Relative humidity: | 0 ... 95 % non-condensing |
Degree of protection: | IP20 |
Connection: | USB (type A) Connector , red and black test clips |
Material: | Polycarbonate |
Dimensions: | 96 mm x 47 mm x 24 mm |
Cable length: | 1.8 m 2-strand wire terminating in 2 test clips , 15.2 cm cable terminating in 1 USB type A connector |
Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
ECCN: | |
Country of Origin: | US |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |