914558
NMB1,5-8GM35-E2-FE-1M-V1
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Cable connector M12 x 1 , 3-pin with PUR cable 1 m, Degree of protection: IP67fa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 1.5 mm |
| Installation: | flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 1.215 mm |
| Actuating element: | Ferrous targets |
| Reduction factor rAl: | 0 |
| Reduction factor rCu: | 0 |
| Reduction factor r304: | 0.4 - 0.7 |
| Reduction factor rSt37: | 1 |
| Reduction factor rBrass: | 0 |
| Output type: | 3-wire |
| Operating voltage: | 10 ... 30 V DC |
| Switching frequency: | 80 Hz |
| Hysteresis: | 5 ... 15 typ. 10 % |
| Reverse polarity protection: | yes |
| Short-circuit protection: | yes |
| Voltage drop: | ≤ 2 V |
| Operating current: | ≤ 100 mA |
| Current consumption: | ≤ 10 mA |
| Off-state current: | ≤ 10 µA |
| Operation indicator: | LED red: output |
| Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 75 °C (-13 ... 167 °F) |
| Connection type: | Cable connector M12 x 1 , 3-pin with PUR cable 1 m |
| Core cross-section: | 0.14 mm2 |
| Housing material: | Stainless steel 1.4305 / AISI 303 |
| Sensing face: | Stainless steel 1.4305 / AISI 303 |
| Housing diameter: | 8 mm |
| Degree of protection: | IP67 |
| ECCN: | |
| Country of Origin: | Tscheschische Republik |
| EAN: | 4050143057849 |
| Weight: | 0.04 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |