805706
SU18-40a/102/115a/123
Fiber optic sensor
Fiber optic sensor for glass fiber optic and plastic fiber optic, slim design, range up to 450 mm, red light, 3 response times available, external Teach-in, light/dark on, 1 NPN output, fixed cable with M8 plug, Basic line for DIN rail installation, Sleek design, 3 response times selectable, High switching frequency, External TEACH-INfa
Sensor range: | up to 150 mm (KLR-C02-2,2-2,0-K146) |
Detection range: | up to 450 mm (KLE-C01-2,2-2,0-K116) |
Light source: | LED |
Light type: | modulated visible red light , 660 nm |
Ambient light limit: | 10000 Lux |
MTTFd: | 690 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Operation indicator: | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator: | LED yellow: static illumination switching state, flashes when falling short of the stability control |
Control elements: | Teach-In key slide switch 2 positions: light/dark switching slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode - normal, high speed , high resolution |
Operating voltage: | 10 ... 30 V DC |
Ripple: | 10 % |
No-load supply current: | ≤ 30 mA |
Function input: | external Teach-In |
Pre-fault indication output: | 1 NPN, short-circuit protected open collector |
Switching type: | light/dark on, switchable |
Signal output: | 1 NPN, short-circuit protected open collector |
Switching voltage: | max. 30 V DC |
Switching current: | max. 100 mA , resistive load |
Voltage drop: | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA |
Switching frequency: | Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 500 Hz |
Response time: | Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 1 ms |
Repeat accuracy: | ≤ 0.5 % of adjusted sensor range |
Standard conformity: Product standard: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
UL approval: | cULus Listed, Class 2 Power Source, Type 1 enclosure |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -10 ... 55 °C (14 ... 131 °F) |
Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
Housing width: | 9 mm |
Housing height: | 34.5 mm |
Housing depth: | 62.3 mm |
Degree of protection: | IP50 |
Connection: | 200 mm, PVC cable with M8 connector, 4-pin |
Material: Housing: | PC |
Mass: | 45 g |
ECCN: | |
Country of Origin: | VN |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |