804932
NBB5-18GM50-E3-5M
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: cable, Degree of protection: IP67fa
Switching function: | Normally closed (NC) |
Output type: | PNP |
Rated operating distance: | 5 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 4.05 mm |
Reduction factor rAl: | 0.3 |
Reduction factor rCu: | 0.3 |
Reduction factor r304: | 0.7 |
Output type: | 3-wire |
Operating voltage: | 10 ... 30 V |
Switching frequency: | 0 ... 800 Hz |
Hysteresis: | typ. 5% |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 3 V |
Operating current: | 0 ... 200 mA |
Off-state current: | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
No-load supply current: | ≤ 20 mA |
Switching state indicator: | all direction LED, yellow |
MTTFd: | 1190 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Connection type: | cable |
Housing material: | brass, nickel-plated |
Sensing face: | PBT |
Degree of protection: | IP67 |
Cable: Wire end ferrules: | yes |
Cable: Core cross-section: | 0.34 mm2 |
Cable: Length: | 5 m |
ECCN: | |
Country of Origin: | VN |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |