Pepperl+Fuchs
309512
LS684-DA-EN/F2/35/146
Pepperl+Fuchs 309512
LS684-DA-EN/F2/35/146
Optical data coupler
Description
Optical data coupler for fast Ethernet, 300 m detection range, red light, 100 MBit/s data rate, M12 plug, Fast Ethernet; Powerlink; EtherCAT; Profinet, Independent of Ethernet protocol, Optimized for real-time Ethernet such as PROFINET IRT and EtherCAT, Version for low temperature applications, No parameterizationfa. The optical data coupler connects Ethernet modules to remote modules. These can move toward each other along an axis. The devices are ideal for conditions in high-rack storage. The physical transfer takes place protocol-free with 100 MBit/s full duplex. The device offers robust optical data transfer in real time for industrial Ethernet networks such as PROFINET IRT and EtherCAT. The optical data coupler guarantees a consistent turnaround time for synchronous, jitter-free switching operations and control processes at both ends of the transmission range – over any distance and with any driving dynamics.
Technical parameters
| Effective detection range: | 0 ... 300 m |
| Threshold detection range: | 320 m |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Laser nominal ratings: Note: | VISIBLE LASER RADIATION , DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser nominal ratings: Laser class: | 1M |
| Laser nominal ratings: Wave length: | 660 nm |
| Laser nominal ratings: Beam divergence: | 15 mrad |
| Laser nominal ratings: Pulse length: | 8 ns |
| Laser nominal ratings: Repetition rate: | 62.5 MHz |
| Laser nominal ratings: Maximum optical power output: | 60 mW |
| Diameter of the light spot: | 1.5 m at a distance of 100 m |
| Angle of divergence: | 1 ° |
| Ambient light limit: | > 10000 Lux |
| MTTFd: | 58.6 a |
| Mission Time (TM): | 10 a |
| Diagnostic Coverage (DC): | 0 % |
| Data flow indicator: | LED green: OPTO-Link LED yellow: LAN-Link LED red: ERROR |
| Function indicator: | Signal strength (8 LED: Red, yellow, green) |
| Operating voltage: | 18 ... 30 V DC |
| No-load supply current: | 200 mA |
| Data rate: | 100 MBit/s (Fast Ethernet) |
| Signal delay: | 3.4 µs (across the entire effective operating distance) |
| Interface type: | 100 BASE-TX |
| Pre-fault indication output: | 1 PNP, inactive when falling short of the stability control , short-circuit protected, max. 200 mA |
| Laser safety: | EN 60825-1:2007 |
| UL approval: | cULus Listed |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -30 ... 50 °C (-22 ... 122 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP65 |
| Material: Housing: | ABS / PC |
| Material: Optical face: | plastic |
| Mass: | 700 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | Deutschland |
| EAN: | 4050143052547 |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |