View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
309027
ML100-54-7346/59/98/103/154
Request a Quote
Pepperl+Fuchs 309027
ML100-54-7346/59/98/103/154
Retroreflective sensor with polarization filter
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, dark on, DC version, PNP output, M8 plug, No controls, Miniature design, Easy to use, Clearly visible LEDs for Power ON, switching state and weak signal indication, Very bright, highly visible light spotfa. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
Technical parameters
| Effective detection range: | 0 ... 3.5 m |
| Reflector distance: | 0.01 ... 3.5 m |
| Threshold detection range: | 4.5 m |
| Reference target: | H50 reflector |
| Light source: | LED |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 350 mm at a distance of 4.5 m |
| Angle of divergence: | approx. 4 ° |
| Optical face: | frontal |
| Ambient light limit: | EN 60947-5-2:2007+A1:2012 |
| MTTFd: | 860 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: power on |
| Function indicator: | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 20 mA |
| Switching type: | dark on |
| Signal output: | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| UL approval: | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 11 mm |
| Housing height: | 31 mm |
| Housing depth: | 20 mm |
| Degree of protection: | IP67 |
| Connection: | Connector M8 x 1 , 3-pin |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 10 g |
| Tightening torque, fastening screws: | 0.6 Nm |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |