305877
NBB2-12GM30-E2-5M-PUR
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: cable PUR , 5 m, Degree of protection: IP67fa
Switching function: | Normally open (NO) |
Output type: | PNP |
Rated operating distance: | 2 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 1.62 mm |
Reduction factor rAl: | 0.3 |
Reduction factor rCu: | 0.2 |
Reduction factor r304: | 0.7 |
Output type: | 3-wire |
Operating voltage: | 10 ... 30 V |
Switching frequency: | 0 ... 800 Hz |
Hysteresis: | typ. 10 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 3 V |
Operating current: | 0 ... 200 mA |
Off-state current: | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
No-load supply current: | ≤ 15 mA |
MTTFd: | 1260 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
UL approval: | cULus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Connection type: | cable PUR , 5 m |
Core cross-section: | 0.14 mm2 |
Cable diameter: | 3.5 mm |
Housing material: | brass, nickel-plated |
Sensing face: | PBT |
Degree of protection: | IP67 |
Mass: | 30 g |
ECCN: | |
Country of Origin: | ID |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |