View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
303125
HiC5863Y1
Request a Quote
Pepperl+Fuchs 303125
HiC5863Y1
Relay Module
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
This signal conditioner provides the galvanic isolation between field circuits and control circuits. 1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 19 V DC .. 27.6 V DC, Relay contact output for energized to safe function , Test pulse immunity, Up to SIL 3 acc. to IEC 61508pa. The device is a relay module that is suitable for safely switching applications of a load circuit. The device isolates load circuits up to 30 V and the 24 V control circuit. The energized to safe (ETS) function is permitted for SIL 3 applications. For testing of the relays, test terminals can be used. The test mode will be indicated by a LED according to NAMUR NE44.
Technical parameters
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Connection: | loop powered |
| Rated voltage: | 19 ... 30 V DC loop powered |
| Power dissipation: | < 1.3 W |
| Power consumption: | < 1.3 W |
| Connection side: | control side |
| Connection: | Input SL1: 8a(+), 7a(-) ; test input SL1: 3a(-), 3b(+), 4a(+), 4b(+) |
| Pulse/Pause ratio: | 150 ms / 150 ms |
| Test pulse length: | max. 4 ms from DO card |
| Test input: | see Functional Safety Manual |
| Signal level: | 0-signal: -5 ... 5 V 1-signal: 19 ... 27.6 V |
| Rated voltage: | 19 ... 27.6 V loop powered |
| Rated current: | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
| Connection side: | field side |
| Connection: | SL2: 5a, 7a; 1a, 3a |
| Contact loading: | 253 V AC/2 A/cos φ 0,7; 30 V DC/2 A resistive load |
| Minimum switch current: | 10 mA / 24 V DC |
| Energized/De-energized delay: | 150 ms / 150 ms |
| Mechanical life: | 2 x 107 switching cycles |
| Switching frequency: | < 3 Hz |
| Input/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 Veff |
| Output/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 Veff |
| Display elements: | LEDs |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Electromagnetic compatibility: | NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008 |
| Degree of protection: | IEC 60529:2013 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. |
| Degree of protection: | IP20 |
| Mass: | approx. 100 g |
| Dimensions: | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mounting: | on Termination Board |
| Coding: | no pin trimmed For further information see system description. |
| Certificate: | PF 17 CERT 4312 X |
| Low voltage: Marking: | II 3G Ex nC ec IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Logistic parameters
| ECCN: | |
| Country of Origin: | Singapur |
| EAN: | 4050143076369 |
| Weight: | 0.13 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |