297910
NBxx-F58E1x3-E8-V1
Inductive power clamp sensor
Series: Rectangular type, Housing material: PA66, Output type: 4-wire, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP65fa
| Switching function: | 2 x normally open (NO) |
| Output type: | PNP |
| Output polarity: | DC |
| Output type: | 4-wire |
| Operating voltage: | 10 ... 30 V |
| Switching frequency: | 0 ... 100 Hz |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 3 V |
| Rated insulation voltage: | 60 V |
| Operating current: | 0 ... 100 mA |
| Off-state current: | 0 ... 0.5 mA typ. 0.1 µA at 25 °C |
| No-load supply current: | ≤ 15 mA |
| Constant magnetic field: | 100 mT |
| Alternating magnetic field: | 100 mT |
| Tuning-out: | typically 1 s |
| Operating voltage indicator: | LED green |
| Switching state indicator: | Switching state "closed" = LED red (S2) switching state "open" = LED yellow (S1) |
| MTTFd: | 1000 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 50 °C (-13 ... 122 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | PA66 |
| Degree of protection: | IP65 |
| Protection class: | II |
| Note: | only for use with satellite unit NBN2-F58xx... family |
| ECCN: | |
| Country of Origin: | ID |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |