Pepperl+Fuchs
295670-100085
OBR25M-R201-2EP-IO-V31-L
Pepperl+Fuchs 295670-100085
OBR25M-R201-2EP-IO-V31-L
Laser retroreflective sensor
Description
Laser retroreflective sensor, Medium design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, Extended temperature range. 40°C ... 60°C, High degree of protection IP69K, IO-link interface for service and process datafa. The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design – from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and can be adapted to the application environment.
Technical parameters
| Effective detection range: | 0 ... 25 m |
| Reflector distance: | 0.5 ... 25 m |
| Threshold detection range: | 33 m |
| Reference target: | H85-2 reflector |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 680 nm |
| Laser nominal ratings: Beam divergence: | > 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm |
| Laser nominal ratings: Pulse length: | 1.6 µs |
| Laser nominal ratings: Repetition rate: | max. 17.6 kHz |
| Laser nominal ratings: max. pulse energy: | 9.6 nJ |
| Diameter of the light spot: | approx. 50 mm at a distance of 25 m |
| Angle of divergence: | approx. 0.1 ° |
| Ambient light limit: | EN 60947-5-2 : 60000 Lux |
| MTTFd: | 672 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Function indicator: | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Control elements: | Light-on/dark-on changeover switch |
| Control elements: | sensitivity adjustment |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 15 mA at 24 V Operating voltage |
| Protection class: | III |
| Interface type: | IO-Link ( via C/Q = pin 4 ) |
| Device profile: | Identification and diagnosis Smart Sensor type 2.4 |
| Transfer rate: | COM 2 (38.4 kBaud) |
| IO-Link Revision: | 1.1 |
| Min. cycle time: | 2.3 ms |
| Process data width: | Process data input 2 Bit Process data output 2 Bit |
| SIO mode support: | yes |
| Device ID: | 0x111212 (1118738) |
| Compatible master port type: | A |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Signal output: | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Usage category: | DC-12 and DC-13 |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 2000 Hz |
| Response time: | 250 µs |
| Communication interface: | IEC 61131-9 |
| Product standard: | EN 60947-5-2 |
| Laser safety: | EN 60825-1:2014 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 15 mm |
| Housing height: | 61.7 mm |
| Housing depth: | 41.7 mm |
| Degree of protection: | IP67 / IP69 / IP69K |
| Connection: | 4-pin, M8 x 1 connector, 90° rotatable |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 44 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |