Pepperl+Fuchs
295670-100005
OBD1400-R200-2EP-IO-V1
Pepperl+Fuchs 295670-100005
OBD1400-R200-2EP-IO-V1
Diffuse mode sensor
Description
The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design – from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks. Diffuse mode sensor, Medium design with versatile mounting options, Extended temperature range. 40°C ... 60°C, High degree of protection IP69K, IO-link interface for service and process datafa. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and can be adapted to the application environment.
Technical parameters
| Detection range: | 2 ... 1400 mm |
| Detection range min.: | 100 ... 200 mm |
| Detection range max.: | 2 ... 1400 mm |
| Adjustment range: | 200 ... 1400 mm |
| Reference target: | standard white, 100 mm x 100 mm |
| Light source: | LED |
| Light type: | modulated visible red light |
| LED risk group labelling: | exempt group |
| Diameter of the light spot: | approx. 50 mm at a distance of 1400 mm |
| Angle of divergence: | 2 ° |
| Ambient light limit: | EN 60947-5-2 : 60000 Lux |
| MTTFd: | 724 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Function indicator: | LED yellow: constantly on - object detected constantly off - object not detected |
| Control elements: | Light-on/dark-on changeover switch |
| Control elements: | Sensing range adjuster |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 18 mA at 24 V Operating voltage |
| Protection class: | III |
| Interface type: | IO-Link ( via C/Q = pin 4 ) |
| Device profile: | Identification and diagnosis Smart Sensor type 2.4 |
| Transfer rate: | COM 2 (38.4 kBaud) |
| IO-Link Revision: | 1.1 |
| Min. cycle time: | 2.3 ms |
| Process data width: | Process data input 1 Bit Process data output 2 Bit |
| SIO mode support: | yes |
| Device ID: | 0x111101 (1118465) |
| Compatible master port type: | A |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on |
| Signal output: | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Usage category: | DC-12 and DC-13 |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Communication interface: | IEC 61131-9 |
| Product standard: | EN 60947-5-2 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 15 mm |
| Housing height: | 50.6 mm |
| Housing depth: | 41.7 mm |
| Degree of protection: | IP67 / IP69 / IP69K |
| Connection: | 4-pin, M12 x 1 connector, 90° rotatable |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 37 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |