Pepperl+Fuchs
284586-100003
VLM350-F280-R4-1001
Pepperl+Fuchs 284586-100003
VLM350-F280-R4-1001
Laser light sensor
Description
The SmartRunner Matcher compares current height profiles with a previously taught-in height profile. The Matcher is based on innovative SmartRunner technology and combines the light section method for detecting height profiles with a 2-D vision sensor. The light section method involves projecting a laser line onto an object. This is then detected by a camera at a specific angle. A height profile is then created using the triangulation principle. This innovative laser technology provides reliable measurements on different surfaces. Laser light sensor for profile matching; Comparison of up to 32 height profiles; Output of X/Z offset; Resolution: 752 x 480 pixel; Measuring range: X = 40 ... 160 mm, Z = 60 ... 350 mm; Scan rate: 10 s-1; 2 digital outputs; RS-485 interfacefa
Technical parameters
| Measurement range: | X = 40 ... 160 mm ; Z = 60 ... 350 mm |
| Light source: | laser diode |
| Light type: | red laser + Integrated LED lightning red 650 nm |
| Laser nominal ratings: Note: | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | Measurement laser: 660 nm |
| Laser nominal ratings: Pulse length: | Measurement laser: 0.5 ms |
| Laser nominal ratings: Maximum optical power output: | Measurement laser: 15 mW |
| Laser nominal ratings: Laser monitoring: | The safety system switches off the laser when the laser current is too high |
| Scan rate: | 10 s-1 |
| Resolution: | X > 0.44 mm ; Z > 0.4 mm at 60 mm read distance |
| MTTFd: | 20 a |
| Mission Time (TM): | 10 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Diagnostics indicator: | LED yellow / red |
| Function indicator: | Trigger: LED yellow ; object detected : LED red / green |
| Control elements: | 2 push-buttons |
| Operating voltage: | 24 V ± 20 % , PELV |
| No-load supply current: | max. 250 mA |
| Power consumption: | max. 6 W , Outputs without load |
| Interface type: | RS 485 interface |
| Physical: | Switchable terminal resistor |
| Protocol: | binary code |
| Transfer rate: | 38400 ... 230400 Bit/s |
| Input voltage: | 24 V |
| Number/Type: | External triggering + 1 Input |
| Switching threshold: | low: < 2.5 V, high: > 8 V |
| Number/Type: | 2 digital outputs |
| Switching type: | PNP |
| Switching voltage: | 24 V |
| Switching current: | 150 mA each output |
| Standard conformity: Noise immunity: | EN 61000-6-2:2005 |
| Standard conformity: Emitted interference: | EN 61000-6-4:2007/A1:2011 |
| Standard conformity: Degree of protection: | EN 60529 |
| Standard conformity: Shock and impact resistance: | EN 60068-2-27:2009 |
| Standard conformity: Laser class: | IEC 60825-1:2007 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Approvals: | CE |
| Operating temperature: | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) |
| Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
| Degree of protection: | IP67 |
| Connection: | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system |
| Material: Housing: | PC/ABS |
| Material: Optical face: | Plastic pane |
| Mass: | approx. 125 g |
| Tightening torque, fastening screws: | max. 2 Nm |
| Note: | Security Instructions: - Read the operating instructions before attempting commissioning - Installation, connection and adjustments should only be undertaken by specialist personnel - Not a safety component in accordance with the EU Machinery Directive |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |