283416-0006
NBB8-18GM50-EI-V1-M1
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP68 / IP69Kfa
Output type: | Digital current output |
Rated operating distance: | 8 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 6.48 mm |
Actuating element: | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 24 mm x 24 mm x 1 mm |
Reduction factor rAl: | 0.4 |
Reduction factor rCu: | 0.3 |
Reduction factor r304: | 0.7 |
Reduction factor rBrass: | 0.45 |
Output type: | 3-wire |
Operating voltage: | 9 ... 30 V DC |
Switching frequency: | 0 ... 1300 Hz |
Hysteresis: | 2 ... 15 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | yes |
Temperature drift: | ≤ 10 % |
Time delay before availability: | ≤ 5 ms |
Load resistor: | 100 ... 250 Ohm |
Switching state indicator: | LED, yellow |
MTTFd: | 1545 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Output type: | object detected: 10 mA ± 1 mA object not detected: 5 mA ± 1 mA |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: | cULus Listed, General Purpose, Class 2 Power Source |
E1 Type approval: | 10R-04 |
Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | Connector plug M12 x 1 , 4-pin |
Housing material: | brass, nickel-plated |
Sensing face: | PBT |
Degree of protection: | IP68 / IP69K |
Mass: | 60 g |
Scope of delivery: | 2 self locking nuts in scope of delivery |
ECCN: | |
Country of Origin: | Tscheschische Republik |
EAN: | 4050143048557 |
Weight: | 0.06 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |