283416-0002
NBB15-30GM50-EI-V1-M1
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP68 / IP69Kfa
| Output type: | Digital current output |
| Rated operating distance: | 15 mm |
| Installation: | flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 12.15 mm |
| Actuating element: | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 45 mm x 45 mm x 1 mm |
| Reduction factor rAl: | 0.5 |
| Reduction factor rCu: | 0.4 |
| Reduction factor r304: | 0.7 |
| Reduction factor rBrass: | 0.5 |
| Output type: | 3-wire |
| Operating voltage: | 9 ... 30 V DC |
| Switching frequency: | 0 ... 700 Hz |
| Hysteresis: | 2 ... 15 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | yes |
| Temperature drift: | ≤ 10 % |
| Time delay before availability: | ≤ 5 ms |
| Load resistor: | 100 ... 250 Ohm |
| Switching state indicator: | LED, yellow |
| MTTFd: | 1556 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Output type: | object detected: 10 mA ± 1 mA object not detected: 5 mA ± 1 mA |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose, Class 2 Power Source |
| E1 Type approval: | 10R-04 |
| Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | brass, nickel-plated |
| Sensing face: | PBT |
| Degree of protection: | IP68 / IP69K |
| Mass: | 140 g |
| Scope of delivery: | 2 self locking nuts in scope of delivery |
| ECCN: | |
| Country of Origin: | Tscheschische Republik |
| EAN: | 4050143048533 |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |