Pepperl+Fuchs
267075-100041
OBD1000-R100-EP-IO-0,3M-V3
Pepperl+Fuchs 267075-100041
OBD1000-R100-EP-IO-0,3M-V3
Diffuse mode sensor
Description
Diffuse mode sensor, Miniature design with versatile mounting options, Extended temperature range. 40°C ... 60°C, High degree of protection IP69K, IO-link interface for service and process datafa. The R100 series miniature optical sensors are the first devices of their kind to offer an endto- end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.
Technical parameters
| Detection range: | 2 ... 1000 mm |
| Detection range min.: | 20 ... 50 mm |
| Adjustment range: | 50 ... 1000 mm |
| Reference target: | standard white, 100 mm x 100 mm |
| Light source: | LED |
| Light type: | modulated visible red light |
| LED risk group labelling: | exempt group |
| Diameter of the light spot: | approx. 65 mm at a distance of 1000 mm |
| Angle of divergence: | 3.7 ° |
| Ambient light limit: | EN 60947-5-2 |
| MTTFd: | 724 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Function indicator: | LED yellow: constantly on - object detected constantly off - object not detected |
| Control elements: | Light-on/dark-on changeover switch |
| Control elements: | Sensing range adjuster |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 25 mA at 24 V supply voltage |
| Protection class: | III |
| Interface type: | IO-Link ( via C/Q = pin 4 ) |
| Transfer rate: | COM 2 (38.4 kBaud) |
| IO-Link Revision: | 1.1 |
| Min. cycle time: | 2.3 ms |
| Process data width: | Process data input 1 Bit Process data output 2 Bit |
| SIO mode support: | yes |
| Device ID: | 0x110101 (1114369) |
| Compatible master port type: | A |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link |
| Signal output: | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Usage category: | DC-12 and DC-13 |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Communication interface: | IEC 61131-9 |
| Product standard: | EN 60947-5-2 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 11 mm |
| Housing height: | 37.1 mm |
| Housing depth: | 21.5 mm |
| Degree of protection: | IP67 / IP69 / IP69K |
| Connection: | 300 mm fixed cable with M8 x 1, 3-pin connector |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 10 g |
| Cable length: | 0.3 m |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |