261468
NBN12-18GM50-E2-V1-Y261468
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 4-pin, Degree of protection: IP67fa
Switching function: | Normally open (NO) |
Output type: | PNP |
Rated operating distance: | 12 mm |
Installation: | non-flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 9.72 mm ( -25 ... 70 °C (-13 ... 158 °F) ) 0 ... mm ( -40 ... -25 °C (-40 ... -13 °F) ) |
Reduction factor rAl: | 0.5 |
Reduction factor rCu: | 0.4 |
Reduction factor r304: | 0.7 |
Operating voltage: | 10 ... 30 V |
Switching frequency: | 0 ... 200 Hz |
Hysteresis: | typ. 5% |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 3 V |
Operating current: | 0 ... 200 mA |
No-load supply current: | ≤ 10 mA |
Switching state indicator: | Multihole-LED, yellow |
MTTFd: | 1570 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -40 ... 70 °C (-40 ... 158 °F) |
Connection type: | Connector M12 x 1 , 4-pin |
Housing material: | brass, nickel-plated |
Sensing face: | PBT |
Housing diameter: | 18 mm |
Degree of protection: | IP67 |
ECCN: | |
Country of Origin: | VN |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |