Pepperl+Fuchs 245611

VBA-2E-G10-ZAL-1M-2V31-G

AS-Interface sensor/actuator module

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

G10 ultra compact module. 2 inputsfa. The AS-Interface G10 ultra-compact module is suitable for the remote connection of sensors and actuators within very limited space. The one-piece enclosure has the protection degree IP68/IP69K. The AS-Interface flat cable is contacted via pointy, gold-plated contact pins. The exact location of the pins on the lead is ensured by the swivel mechanism. Sensors and actuators are connected to the module via M8 sockets. Multiple LEDs indicate the current status of the AS-Interface strand and the inputs and outputs and are used for diagnosis. The ultra-compact module is powered from UAUX.

Technical parameters

Slave type: A/B slave
AS-Interface specification: V3.0
Required master specification: ≥ V2.1
UL File Number: E223772 "For use in NFPA 79 Applications only"
LED FAULT: Fault indication; red LED Red: Communication fault or address is 0 Flashing red: Sensor supply overload or no external auxiliary power UAUX
LED AS-i: AS-Interface voltage; LED green
LED IN: switching state (input); 2 LED yellow
Auxiliary voltage: 20 ... 30 V DC PELV
Rated operating voltage: 18.5 ... 31.6 V from AS-Interface
Rated operating current: ≤ 40 mA / max. 60 mA
Protection class: III
Surge protection: UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)
Number/Type: 2 inputs for 2- or 3-wire sensors (PNP), DC
Supply: from external auxiliary voltage UAUX
Voltage: 20 ... 30 V
Current loading capacity: ≤ 1000 mA overload and short-circuit resistant
Input current: ≤ 9 mA (limited internally)
Switching point: according to DIN EN 61131-2 (Type 2)
: 0 (unattenuated): ≤ 3 mA
: 1 (attenuated): ≥ 5 mA
Signal delay: < 1 ms (input/AS-Interface)
Electromagnetic compatibility: Directive 2014/30/EU: EN 62026-2:2013
Degree of protection: EN 60529:2000
Fieldbus standard: EN 62026-2:2013
Input: EN 61131-2:2007
Emitted interference: EN 61000-6-4:2007
AS-Interface: EN 62026-2:2013
Noise immunity: EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013
Profile: S-0.A.E
IO code: 0
ID code: A
ID1 code: 7
ID2 code: E
Data bits (function via AS-Interface): input output
Electromagnetic compatibility: D0: IN1 -
Electromagnetic compatibility: D1: IN2 -
Electromagnetic compatibility: D2: - -
Electromagnetic compatibility: D3: - -
Parameter bits (programmable via AS-i): function
Electromagnetic compatibility: P0: not used
Electromagnetic compatibility: P1: Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings)
Electromagnetic compatibility: P2: Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings)
Electromagnetic compatibility: P3: not used
UL approval: cULus Listed, Type 1 enclosure
Electromagnetic compatibility: Maximum permissible ambient temperature: max. 65 °C (max. 149 °F)
Ambient temperature: -25 ... 70 °C (-13 ... 158 °F)
Storage temperature: -25 ... 85 °C (-13 ... 185 °F)
Shock and impact resistance: 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks
Vibration resistance: 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Degree of protection: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-*
Connection: AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: NF003-SS1-A (3-pin, bushing contacts, snap lock, A-coded) Matching connector: NM003-Sx1-A or similar
Material: Contacts: CuSn / Au
Material: Housing: PBT PC
Material: Body: black PUR
Material: Cable: PUR
Material: Mounting screw: Stainless steel 1.4305 / AISI 303
Cable: Sheath diameter: ∅4,3 mm
Cable: Color: black
Cable: Cores: 3 x 0.34 mm2
Cable: Length: 1 m
Mass: 100 g
Tightening torque, fastening screws: 1.65 Nm
Tightening torque, cable gland: 0.4 Nm

Logistic parameters

ECCN:
Country of Origin: ID
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m