Pepperl+Fuchs
214923
GLV18-55-G/25/102/115
Pepperl+Fuchs 214923
GLV18-55-G/25/102/115
Retroreflective sensor
Description
Retroreflective sensor for glass detection, M18 threaded housing design, plastic housing, front optical face, 2.5 m detection range, red light, light on, DC version, NPN output, fixed cable, Efficient Line in a short M18 plastic housing for standard applications, Two devices in one: choice of either clear object detection or retroreflective operating mode with a large detection range, 4 LEDs indicator for 360° visibilityfa. The GLV/GLK18 series sensors help improve the efficiency of machines and systems. The design of the M18 plastic housing, the connection technology, and sensor properties are highly standardized. Concentrating on the key sensor requirements has produced a robust and reliable product series for DC and AC/DC voltage systems without any over-engineering. The mounting set included in the scope of delivery and the optimized potentiometer design ensure fast assembly and easy configuration.
Technical parameters
| Effective detection range: | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
| Reflector distance: | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
| Threshold detection range: | 6.5 m |
| Reference target: | reflector C110-2 |
| Light source: | LED |
| Light type: | modulated visible red light , 640 nm |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 370 mm at 6.5 m ; 50 mm at 1 m |
| Angle of divergence: | approx. 2 ° |
| Optical face: | frontal |
| Ambient light limit: | 30000 Lux |
| MTTFd: | 1260 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green, statically lit Power on, blinking with 2 Hz or 4 Hz in Teach-In mode |
| Function indicator: | LED yellow: In retro-reflective mode: Lights up when light beam is free; flashing if signal is short of function reserve, off when light beam is interrupted In glass-mode: Lights up when light beam is free; flashing if further compensation is impossible; off when light beam is interrupted |
| Control elements: | potentiometer for Teach-In and Mode selection |
| Contrast detection levels: | 18 % - clear glass bottles |
| Operating voltage: | 10 ... 30 V DC |
| No-load supply current: | < 15 mA |
| Switching type: | light on |
| Signal output: | 1 NPN, short-circuit protected open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1 kHz |
| Response time: | ≤ 0.5 ms |
| Product standard: | EN 60947-5-2 |
| Protection class: | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval: | cULus Listed, Class 2 Power Source |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP67 |
| Connection: | 2 m fixed cable |
| Material: Housing: | PC |
| Material: Optical face: | PMMA |
| Material: Cable: | PVC |
| Mass: | approx. 75 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |