Pepperl+Fuchs
188545
GD18/GV18/59/102/159
Pepperl+Fuchs 188545
GD18/GV18/59/102/159
Thru-beam sensor
Description
The GLV/GLK18 series sensors help improve the efficiency of machines and systems. The design of the M18 plastic housing, the connection technology, and sensor properties are highly standardized. Concentrating on the key sensor requirements has produced a robust and reliable product series for DC and AC/DC voltage systems without any over-engineering. The mounting set included in the scope of delivery and the optimized potentiometer design ensure fast assembly and easy configuration. Thru-beam sensor, M18 threaded housing design, plastic housing, front optical face, 20 m detection range, red light, dark on, DC version, NPN output, M12 plug, Efficient Line in a short M18 plastic housing for standard applications, Very high detection range, 4 LEDs indicator for 360° visibility, Version with front optical face, DC voltage versionfa
Technical parameters
| Emitter: | GD18/159 |
| Receiver: | GV18/59/102/159 |
| Effective detection range: | 0 ... 20 m |
| Threshold detection range: | 25 m |
| Light source: | LED |
| Light type: | modulated visible red light , 640 nm |
| Diameter of the light spot: | approx. 1300 mm at 25 m |
| Angle of divergence: | approx. 3 ° |
| Optical face: | frontal |
| Ambient light limit: | 30000 Lux |
| MTTFd: | 630 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green, statically lit Power on |
| Function indicator: | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted |
| Operating voltage: | 10 ... 30 V DC |
| No-load supply current: | < 20 mA |
| Switching type: | dark on |
| Signal output: | 1 NPN, short-circuit protected open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 500 Hz |
| Response time: | ≤ 1 ms |
| Product standard: | EN 60947-5-2 |
| Protection class: | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval: | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP67 |
| Connection: | 3-pin, M12 x 1 connector |
| Material: Housing: | PC |
| Material: Optical face: | PMMA |
| Material: Connector: | plastic |
| Mass: | approx. 10 g per device |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |