111685
UB3000-F42-UK-V95
Ultrasonic sensor
Single head system, Relay output for high power, Extremely small unusable area, TEACH-IN, Series: -F42, Housing: PBTfa
Sensing range: | 200 ... 3000 mm |
Adjustment range: | 240 ... 3000 mm |
Dead band: | 0 ... 200 mm |
Standard target plate: | 100 mm x 100 mm |
Transducer frequency: | approx. 85 kHz |
Response delay: | approx. 325 ms |
LED green: | solid green: Power on |
LED yellow: | solid: switching state switch output flashing: program function |
LED red: | normal operation: "fault" program function: no object detected |
Fusing: | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
Operating voltage: | 22 ... 253 V AC/DC |
No-load supply current: | ≤ 60 mA |
Time delay before availability: | ≤ 800 ms |
Output type: | 1 relay output |
Rated operating current: | 3 A |
Repeat accuracy: | ≤ 0.5 % of switching point |
Switching frequency: | ≤ 1.5 Hz |
Range hysteresis: | 1 % of the set operating distance |
Temperature influence: | ± 1 % of full-scale value |
Standard conformity: Standards: | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
EAC conformity: | TR CU 004/2011 TR CU 020/2011 TR CU 037/2016 |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Degree of protection: | IP65 |
Connection: | 5-pin V95 connector (7/8"-16 UN 2A) |
Material: Housing: | PBT |
Material: Transducer: | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
Mass: | 260 g |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |