108356
NBB2-6,5M25-E3-V3
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector plug M8 x 1 , 3-pin, Degree of protection: IP67fa
| Switching function: | Normally closed (NC) |
| Output type: | PNP |
| Rated operating distance: | 2 mm |
| Installation: | flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 1.62 mm |
| Actuating element: | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 6.5 mm x 6.5 mm x 1 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.7 |
| Reduction factor rBrass: | 0.45 |
| Output type: | 3-wire |
| Operating voltage: | 5 ... 30 V |
| Switching frequency: | 0 ... 6000 Hz |
| Hysteresis: | typ. 5% |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 1.5 V |
| Operating current: | 0 ... 100 mA |
| Off-state current: | 0 ... 0.2 mA |
| No-load supply current: | ≤ 10 mA |
| Time delay before availability: | ≤ 100 ms |
| Switching state indicator: | Multihole-LED, yellow |
| MTTFd: | 960 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M8 x 1 , 3-pin |
| Housing material: | brass, nickel-plated |
| Sensing face: | LCP |
| Degree of protection: | IP67 |
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |