094314
NMB8-30GM65-Z0-FE-V1
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 2-wire, Installation: flush, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specificationfa
| Switching function: | Normally open (NO) |
| Output type: | Two-wire |
| Rated operating distance: | 8 mm |
| Installation: | flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 6.48 mm |
| Actuating element: | Ferrous targets |
| Reduction factor rAl: | 0 |
| Reduction factor rCu: | 0 |
| Reduction factor r304: | 0.75 |
| Reduction factor rSt37: | 1 |
| Reduction factor rBrass: | 0 |
| Output type: | 2-wire |
| Operating voltage: | 6 ... 30 V DC |
| Switching frequency: | 10 Hz |
| Hysteresis: | 3 ... 15 typ. 5 % |
| Reverse polarity protection: | reverse polarity tolerant |
| Short-circuit protection: | no |
| Voltage drop: | ≤ 5.5 V DC |
| Operating current: | 2 ... 100 mA |
| Off-state current: | ≤ 1 mA |
| Operation indicator: | 4-way LED Yellow: output |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | Stainless steel 1.4305 / AISI 303 |
| Sensing face: | Stainless steel 1.4305 / AISI 303 |
| Degree of protection: | IP67 / IP68 / IP69K - cordset dependent according to cable specification |
| ECCN: | |
| Country of Origin: | Indonesien |
| EAN: | 4050143007455 |
| Weight: | 0.17 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |