IC080126
| Cable infeed: | Axial |
| Thread length: | 46mm |
| Design: | Cylinder, screw-thread |
| Housing material: | Stainless steel 1.4305 |
| Ambient temperature: | -25 - 70°C |
| Thread pitch: | 1mm |
| Active area material of sensor: | Stainless steel 1.4305 |
| Pressure-proof: | yes |
| Max. tightening torque: | 6Nm |
| Material thickness: | 0.2mm |
| Pressure resistance: | 60bar |
| Max. operating pressure: | 60bar |
| Thread size, metric: | 8 |
| Mechanical mounting condition for sensor: | Flush |
| Degree of protection (IP): | IP67 |
| Sensor length: | 66mm |
| Alignment of cable entry: | Axial |
| Voltage type: | DC |
| Switching frequency: | 1200Hz |
| Type of electrical connection: | Connector M12 |
| Type of switching function: | Normally open contact |
| Supply voltage: | 10 - 30V |
| Short-circuit protection: | yes |
| Hysteresis: | 20% |
| Correction factor (stainless steel V2A: 1mm): | 0.3 |
| Correction factor (aluminum): | 1 |
| Correction factor (copper): | 0.9 |
| Voltage drop: | 2V |
| Readiness delay: | 10ms |
| Cascadable: | no |
| Switching distance: | 3mm |
| Type of switching output: | PNP |
| No-load current: | 10mA |
| Rated switching current: | 200mA |
| Reverse polarity protection: | yes |
| Correction factor (St37): | 1 |
| Correction factor (stainless steel V2A: 2mm): | 0.6 |
| Correction factor (brass): | 1.35 |
| Residual ripple: | 20% |
| Norm measuring plate: | 9x9x1mm |
| Max. line length: | 300m |
| eClass 7.0: | 27270101 |
| eClass 7.1: | 27270101 |
| eClass 8.0: | 27270101 |
| eClass 9.0: | 27270101 |
| eClass 9.1: | 27270101 |
| ETIM-6.0: | EC002714 |
| ETIM-7.0: | EC002714 |
| IPF Product Group: | 205 |
| shipping weight: | 0.02kg |
| packaging dimensions: | 100mm x 50mm x 120mm |
| customs tariff number: | 85365019 |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |