TN7531
Temperature sensor with display. TN-013KBBD10-QFPKG/US/ /V
Wide temperature evaluation range. With two programmable switching outputs. Intuitive, user-friendly handling. Local display of the current temperature values
Number of inputs and outputs: | Number of digital outputs: 2 |
Measuring range: | -40...150 °C -40...302 °F |
-40...150 °C: | -40...302 °F |
Process connection: | threaded connection M18 x 1,5 internal thread |
Installation length EL [mm]: | 45 |
Special feature: | Gold-plated contacts |
Measuring element: | 1 x Pt 1000; (to DIN EN 60751, class B) |
Media: | liquids and gases |
Pressure rating [bar]: | 300 |
Minimum installation depth [mm]: | 12 |
Operating voltage [V]: | 18...32 DC; ("supply class 2" to cULus) |
Current consumption [mA]: | < 50 |
Protection class: | III |
Reverse polarity protection: | yes |
Power-on delay time [s]: | 1 |
Integrated watchdog: | yes |
Number of inputs and outputs: | Number of digital outputs: 2 |
Total number of outputs: | 2 |
Output signal: | switching signal; IO-Link; (configurable) |
Electrical design: | PNP/NPN |
Number of digital outputs: | 2 |
Output function: | normally open / normally closed; (parameterisable) |
Max. voltage drop switching output DC [V]: | 2 |
Permanent current rating of switching output DC [mA]: | 250 |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Overload protection: | yes |
Probe length L [mm]: | 45 |
Measuring range: | -40...150 °C -40...302 °F |
-40...150 °C: | -40...302 °F |
Set point SP: | -39.5...150 °C -39...302 °F |
-39.5...150 °C: | -39...302 °F |
Reset point rP: | -40...149.5 °C -40...301 °F |
-40...149.5 °C: | -40...301 °F |
In steps of: | 0.1 °C 0.1 °F |
0.1 °C: | 0.1 °F |
Resolution of switching output [K]: | 0.1 |
Resolution of display [K]: | 0.1 |
Switch point accuracy [K]: | ± 0,3 |
Display accuracy [K]: | ± 0,3 |
Temperature drift per 10 K [K]: | 0.1 |
Dynamic response T05 / T09 [s]: | 1 / 3; (to DIN EN 60751) |
Communication interface: | IO-Link |
Transmission type: | COM2 (38,4 kBaud) |
IO-Link revision: | 1.0 |
Ambient temperature [°C]: | -25...70 |
Storage temperature [°C]: | -40...100 |
Protection: | IP 67 |
EMC: | DIN EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m DIN EN 61000-4-4 Burst 2 kV DIN EN 61000-4-5 Surge 1 kV EN 61000-4-6 HF conducted 10 V |
DIN EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
EN 61000-4-3 HF radiated: | 10 V/m |
DIN EN 61000-4-4 Burst: | 2 kV |
DIN EN 61000-4-5 Surge: | 1 kV |
EN 61000-4-6 HF conducted: | 10 V |
Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
DIN IEC 68-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 242 |
Weight [g]: | 212.6 |
Housing: | for adapter |
Materials: | stainless steel (1.4301 / 304); EPDM/X; CO-PC; PBT; FKM; PA |
Materials (wetted parts): | stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A |
Process connection: | threaded connection M18 x 1,5 internal thread |
Installation length EL [mm]: | 45 |
Display: | Display unit 2 x LED, green switching status 2 x LED, yellow measured values alphanumeric display, 4-digit programming alphanumeric display, 4-digit |
Display unit: | 2 x LED, green |
switching status: | 2 x LED, yellow |
measured values: | alphanumeric display, 4-digit |
programming: | alphanumeric display, 4-digit |
Remarks: | The values for accuracy apply to flowing water. |
Notes: | discontinued article |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12; Contacts: gold-plated |
ECCN: | |
Country of Origin: | US |
EAN: | |
Weight: | 0.21 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |